GK75A Power Supply
Power Supply is source with high voltage generator designed for devices of active ionization. Its set-up and operation is simple in use and does not need any additional care. It is possible to supply the operation for more than one static bar.
There is a protection card inside of Power Supply for the system security in case of short circuit. Power Supply cuts down current and disables circuit in connected to it high voltage cable of ionization devices or ionizer. That provides longer life and safety to the transformer, what is inside of power supply.
General Specification
Easy to install / High performance / Safety / Long life
Applications
Coating / Laminating / Plastic bag / Sheeting / Slitting / Rewind / Form fill seal / Stretch wrapping / Wrapping machines / Paper production / Blown film, cast film / Extrusion, flexo sheet / Inkjet, laser / Folding
Technical Spesifications
| Main Voltage | 220-230 VAC / 110V AC | ||
| Main Frequency | 50 / 60 Hz | ||
| Main Connection | IEC-320 Europe Type | ||
| Fuse | 160 m AT/A | ||
| Output Voltage | 7.5 k VAC | ||
| Max Output | Less than 5 mA | ||
| Connections | 4 | ||
| Ambient Temperature | 0 - 60 C | ||
| Weight | 3.2 Kg | ||
| Dimensions | 127.5 x 260 x 100 mm (width x height x length) | ||
| Approval | CE |
GK75/A02 Power Supply
Power Supply is source with high voltage generator designed for devices of active ionization. It can be one or two-fan. Its set-up and operation is simple in use and does not need any additional care. It is possible to supply the operation for more than one static bar. There is a protection card inside of it for the system security in case of short circuit. Power Supply cuts down current and disables circuit in connected to it high voltage cable of ionization devices or ionizer. That provides longer life and safety to the transformer, what is inside of power supply.
Due to high technologically design used in Power Supply it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Power Supply does not need any calibration and can be cleaned and cared easily. Using Power Supply will supply machines to perform hygienic, safe and qualitative production. Power Supply can be designed in different lengths to satisfy the requirements of needs of application.
General Specification
Easy to install / High performance / Safety / Long life
Applications
Coating / Laminating / Plastic bag / Sheeting / Slitting / Rewind / Form fill seal / Stretch wrapping / Wrapping machines / Paper production / Blown film, cast film / Extrusion, flexo sheet / Inkjet, laser / Folding
Technical Specifications
| Main Voltage | 220-230 VAC / 110V AC | ||
| Main Frequency | 50 / 60 Hz | ||
| Main Connection | IEC-320 Europe Type | ||
| Fuse | 160 m AT/A | ||
| Output Voltage | 7.5 k VAC | ||
| Max Output | Less than 5 mA | ||
| Connections | 4 | ||
| Ambient Temperature | 0 - 60 C | ||
| Weight | 3.2 Kg | ||
| Dimensions | 127.5 x 260 x 100 mm (width x height x length) | ||
| Approval | CE |
100HZ Power Supply
PULS 100HZ Power Supply is used in fast running machines in combination with tandem ionizing bars. Any surface charges that might disrupt production will be reliably and effectively removed - even at high speed operations- by using the ionizing unit. Tandem ionizing bars are also suitable for machine with speed of 150m/min
General Specification
Easy, flexible mounting / Small dimension / Safety / Long life
Applications
Coating / Laminating / Plastic bag / Sheeting / Slitting / Wind-Rewind / Form fill seal / Stretch wrapping / Wrapping machines / Paper production / Blown film, cast film / Extrusion, flexo sheet / Inkjet, laser / Folding
Technical Specifications
| Main Voltage | 220-230VAC | ||
| Frequency | 50/60 Hz | ||
| Main Connection | IEC-320 European Type | ||
| Fuse | 160 m AT/A | ||
| Output Voltage | 7.5 kV | ||
| Max. Load | Equivalent to 4meters of ionizing appliances and cables | ||
| Max. Output | Less than 5 mA | ||
| Connections | 4 | ||
| Amblent Tempeature | 0 - 60 C | ||
| Weight | 3.2 kg | ||
| Dimensions | 127.5 x 260 x 100 mm (width x height x length) | ||
| Approval | CE |
Application
Paper Folding Machine Application Sheet
Although paper is not normally associated with static problems, during printing, the paper is dried and the moisture levels drop considerably leaving the substrate susceptible to static charges. When paper is introduced to a folding application such as an MBO folder, the charge on the substrate can cause jamming which will lead to down time and loss of production.
By positioning two (one either side of the web) PULSElectronic ionising bars across the web prior to entry into the folder, you will neutralise the substrate to ensure that the material will fold correctly.
Further Additions may be made depending on how much static is generated during the folding process. Static bars can be added at the transfer point and the exit point to ensure that the collation area is static free.
About Static Electricity
Static electricity refers to the build-up of electric charge on the surface of materials. Materials are made of atoms and normally are electrically neutral by having an equal number of positive and negative charges (proton and electron).
The phenomenon of static electricity occurs when the negative and positive ions imbalance has place to be. This imbalance happens when two materials (atoms) being in contact gain or lose electrons which may move easily between them. Electrons leave an excess of positive charge on one material, and an equal negative charge on the other. When the materials are separated they retain this charge imbalance.
The static charges remain on an object until they either bleed off to ground or are quickly neutralized by a discharge.
Static Measuring
SF 156 Static Meter
The utilization Static Meter is a good solution for technical personnel to analyze and solve troubles caused by static electricity.
Charging Bonding
Static Charging Generator 20, 30, 60, 100, 120 kV
Static Charging Generator is high voltage supplier for neutralizers (anti static devices) working at direct current (DC)
Static Charging Bar
Charging Bar device utilization helps to stick materials to any surface or to each other by static electricity without any glueing substance.
Perforation Detector
Perforation Detector is used to detect perforation on any material in packaging industry or to count the bag numbers by detecting and reporting the perforation in bag making machinery.
IML Foam
IML Foam is used as an electrifiable material on the front face of static loading apparatuses and may stand high voltage.
5 Pin IML Head
5 PIN IML Head is a perfect solution to make tags get glued to mould carefully in in-mould applications.
DC High Voltage Distributor
High voltage distributoris designed to make easy connection in high voltage applications working at direct current (DC)
Static Elimination
KDA 75 Anti Static Bar
KDA 75 Anti Static Bar is a good choice to remove static electricity. It can be used even in high-speed applications.
Anti static Air Gun
Anti static Air Gun is a hand-held ionizing air gun for neutralization static charge and removing dust contamination of industrial applications.
GK75/A02 Power Supply
GK75/A02 Power Supply is used as a high voltage generator designed for devices of one or two-fan ionizing air blowers.
GK75A Power Supply
GK75A Power Supply is used as high voltage generator designed for devices of active ionization.
100HZ Power Supply
100HZ Power Supply is used in fast running machines as supplier for tandem work of two ionizing bars.
Single Anti Static Blower
Single anti static blower with one fan is designed to neutralize the static charges over a large area by supplying enough ionized air flow.
Dual Anti Static Blower
Dual anti static blower with coupled fan is designed to neutralize the static charges over a large area by supplying enough ionized air flow.
Static Control Nozzles
Static control nozzles are designed to neutralize high static charge in those industrial applications where anti static bar cannot be mounted. They are simple, soft and efficient in its use.
Blower Driven Air Boost Bar
Blower driven anti static bar is connected to air apparatus designed to neutralize the static charges at large distances. It provides high performance and efficient ionization with fast discharging time.
Compressed Driven Air Boost Bar
Compressed Driven Air Boost Bar is connected to air apparatus designed to neutralize the static charges at large distances. It provides high performance and efficient ionization with fast discharging time.
AC High Voltage Distributor
High voltage distributor is designed to make easy connection in high voltage applications working at alternating current (AC)
