High voltage distributors are designed to make easy connection in high voltage applications. The new devices are available as 1 in 1out, 1 in 2 out, 1 in 4 out, with and without resistor. It became possible to work with many electrostatic products at the same time and there is no risk to be exposed to high voltage current any more.
Connection
Installation of High Voltage Distributor is very easy. Fix the HV Connectors to output of the Static Generator. After that each port of Connector will be ready to be connected to output of Multi Power Distributor.
Variations of product
- 1 in 1 out without resistant
- 1 in 2 out without resistant
- 1 in 4 out without resistant
- 1 in 1 out with resistant 40 mohm.
- 1 in 2 out with resistant 40 mohm.
- 1 in 4 out with resistant 40 mohm.
- 1 in 1 out with resistant 80 mohm.
- 1 in 2 out with resistant 80 mohm.
- 1 in 2 out with resistant 80 mohm.
Technical Specifications
| Operating Voltage | Max. 30 kV DC | ||
| Connection | Bolted with HV plug | ||
| Construction | Black fire retarder PVC, epoxi | ||
| Dimension | |||
| 1 in 1 out | 76 mm x 117 mm x 35 mm | ||
| 1 in 2 out | 97.5 mm x 117 mm x 35 mm | ||
| 1 in 4 out | 140 mm x 117 mm x 35 mm |
Application
Bag Handling Charging Application
When reinforcing the handles on plastic bags, a further sleeve is added for strength. This sleeve can repel from it set position due to static charges on ether the bag or the sleeve itself. This causes misalignment, wastage, down time and rejects.
After the sleeve has been positioned, you can induce a charge into the material using a PULSElectronic charging system. This will hold the sleeve while the thermo weld is completed and prevent wastage thus increasing productivity.
About Static Electricity
Static electricity refers to the build-up of electric charge on the surface of materials. Materials are made of atoms and normally are electrically neutral by having an equal number of positive and negative charges (proton and electron).
The phenomenon of static electricity occurs when the negative and positive ions imbalance has place to be. This imbalance happens when two materials (atoms) being in contact gain or lose electrons which may move easily between them. Electrons leave an excess of positive charge on one material, and an equal negative charge on the other. When the materials are separated they retain this charge imbalance.
The static charges remain on an object until they either bleed off to ground or are quickly neutralized by a discharge.
Static Measuring
SF 156 Static Meter
The utilization Static Meter is a good solution for technical personnel to analyze and solve troubles caused by static electricity.
Charging Bonding
Static Charging Generator 20, 30, 60, 100, 120 kV
Static Charging Generator is high voltage supplier for neutralizers (anti static devices) working at direct current (DC)
Static Charging Bar
Charging Bar device utilization helps to stick materials to any surface or to each other by static electricity without any glueing substance.
Perforation Detector
Perforation Detector is used to detect perforation on any material in packaging industry or to count the bag numbers by detecting and reporting the perforation in bag making machinery.
IML Foam
IML Foam is used as an electrifiable material on the front face of static loading apparatuses and may stand high voltage.
5 Pin IML Head
5 PIN IML Head is a perfect solution to make tags get glued to mould carefully in in-mould applications.
DC High Voltage Distributor
High voltage distributoris designed to make easy connection in high voltage applications working at direct current (DC)
Static Elimination
KDA 75 Anti Static Bar
KDA 75 Anti Static Bar is a good choice to remove static electricity. It can be used even in high-speed applications.
Anti static Air Gun
Anti static Air Gun is a hand-held ionizing air gun for neutralization static charge and removing dust contamination of industrial applications.
GK75/A02 Power Supply
GK75/A02 Power Supply is used as a high voltage generator designed for devices of one or two-fan ionizing air blowers.
GK75A Power Supply
GK75A Power Supply is used as high voltage generator designed for devices of active ionization.
100HZ Power Supply
100HZ Power Supply is used in fast running machines as supplier for tandem work of two ionizing bars.
Single Anti Static Blower
Single anti static blower with one fan is designed to neutralize the static charges over a large area by supplying enough ionized air flow.
Dual Anti Static Blower
Dual anti static blower with coupled fan is designed to neutralize the static charges over a large area by supplying enough ionized air flow.
Static Control Nozzles
Static control nozzles are designed to neutralize high static charge in those industrial applications where anti static bar cannot be mounted. They are simple, soft and efficient in its use.
Blower Driven Air Boost Bar
Blower driven anti static bar is connected to air apparatus designed to neutralize the static charges at large distances. It provides high performance and efficient ionization with fast discharging time.
Compressed Driven Air Boost Bar
Compressed Driven Air Boost Bar is connected to air apparatus designed to neutralize the static charges at large distances. It provides high performance and efficient ionization with fast discharging time.
AC High Voltage Distributor
High voltage distributor is designed to make easy connection in high voltage applications working at alternating current (AC)
